13 Replies Latest reply: Nov 10, 2014 11:01 AM by Sergey Pilipenko Branched to a new discussion. RSS

    Tutorial domain clustering in JBoss 7 / EAP 6

    Willem Noorduin Newbie

      A while ago I wrote https://community.jboss.org/thread/162859, which described how to setup clusters, mod_cluster, Apache 2.2+ and JBoss 5.1. The same works more-or-less when you want to do such a thing with JBoss 7 standalone nodes, so I think you can figure this one out for yourself. Clustering goes better (in terms that it is much easier to maintain) when you install a domain controller and a couple of slaves which listen to that domain controller.

       

      In this document (typos excluded), I give a howto of such a setup. Maybe it is useful, bits and pieces of this stuff are "in the cloud called the internet" of course.

       

      ===========================

      CHAPTER 1: General architecture

      ===========================

       

      1.1.    Setup of JBoss and purpose of the document

       

      In this chapter we work with three different kind of servers, of which the IP-addresses and the

      canonical names are the following:

       

      192.168.0.1     webserver               ws (Apache 2.2.x)

      192.168.10.0    domain controller       dc (JBoss 7 / EAP6)

      192.168.20.0    applicationserver       slave1 of dc (JBoss 7 / EAP6)

      192.168.30.0    applicationserver       slave2 of dc (JBoss 7 / EAP6)

       

       

      1.2.    JBoss Clusters, Instances and applications:

       

      In this document we configure two apache virtual hosts (www.application1.nl and www.application2.nl).

      Each virtual host shall be connected via mod_cluster with it's own jboss cluster. Clusters are:

       

      cluster1 consists of {node11@as1 and node12@as2)

      cluster2 consists of {node21@as1 and node22@as2}

       

      application1.war is deployed to cluster1 and reacheable via http://www.application1.nl/application1

      application2.war is deployed to cluster2 and reacheable via http://www.application2.nl/application2

       

      In this situation we have two Apache Virtual hosts which sent requests to two different JBoss-AS clusters, each JBoss-AS cluster consists two instances, each one of them runs on a different (physical) Linux Server (or whatever).

       

      In the DNS, both URLs www.application1.nl and www.application2.nl resolve to the webserver, and we are using mod_cluster in combination with ajp (Apache JServ Protocol) to pass application calls to the JBoss-AS cluster.

       

      This document describes the configuration of the domain controller and application servers, and does not concentrate on the mod_cluster aspect so much. When you have a clustername to which you can send your application request, things are very much transparent (but see the CHAPTER 8 in https://community.jboss.org/thread/162859). The goal is to describe the cluster seperation completely from the standpoint of the domain controller / slave relationship. This means that, with exeption of creating a new profile, which has to do by "hand", much of the stuff we do with the JBoss client (jboss-cli) on the domain crontroller.

       

       

      1.3.    Brief contents of this document

       

      CHAPTER 2: Installation and configurating the domain crontroller

       

      CHAPTER 3: Installation of the slaves

       

      CHAPTER 4: Creating a new profile

       

      CHAPTER 5: Configuring the architecture for running a cluster

       

      CHAPTER 6: Deploying the applications

       

      CHAPTER 7: What we have not discussed

       

      =================================

      CHAPTER 2: The domain crontroller

      =================================

       

      2.1.    A brief history of the installation of JBoss 7

       

      After downloading JBoss 7 (mine is called jboss-as-7.1.1.Final.zip) and an Oracle JDK (jdk1.6.0_30.tar.gz) do the following:

       

      root@dc # cd /opt

      root@dc # cp /tmp/jdk1.6.0_30.tar.gz /tmp/jboss-as-7.1.1.Final.zip .

      root@dc # tar xfz jdk1.6.0_30.tar.gz ; unzip jboss-as-7.1.1.Final.zip

      root@dc # ln -s jdk1.6.0_30.tar.gz jdk ; ln -s jboss-as-7.1.1.Final jboss

      root@dc # chown -R jboss:jboss jboss-as-7.1.1.Final

       

      2.2.    Installing the domain-controller

       

      The easiest way to start the domain controller is just fire up /opt/jboss/bin/domain.sh -b <bind-address> after setting JAVA_HOME to the correct value. Note that this is also the clumsiest way, since it starts in the foreground. Now there are plenty of ways to configure it to start in the background and barf into a console log instead of a console-window, but we do not want to go into that here. Now start:

       

      root@dc # /opt/jboss/bin/domain.sh  --domain-config domain.xml --host-config=host-master.xml -P file:///apps/jboss/nlptc27b09/configs/domain.properties

       

      with:

       

      root@192.168.10.0:/opt# cat /apps/jboss/192.168.10.0/configs/domain.properties

       

      jboss.bind.address=192.168.10.0

      jboss.bind.address.management=192.168.10.0

      jboss.socket.binding.port-offset=0

      jboss.config.dir=/apps/jboss/nlptc27b09

      jboss.domain.log.dir=/var/log/jboss/nlptc27b09

      jboss.domain.base.dir=/apps/jboss/profiles/nlptc27b09

      jboss.domain.base.url=file:///apps/jboss/profiles/nlptc27b09

      jboss.domain.master.address=192.168.10.0

      jboss.domain.name=192.168.10.0

       

      Which is just a way of how to administer things more neatly. Anyway, the above processes should run.

       

      You should end with something like this:

       

      root@192.168.10.0:/opt# ps -ef | grep jboss | grep -v grep

      jboss     8339     1  0 08:40 ?        00:00:00 /bin/sh /opt/jboss/bin/domain.sh --domain-config domain.xml --host-config=host.xml -P file:///apps/jboss/192.168.10.0/configs/domain.properties

      jboss     8382  8339  0 08:40 ?        00:00:03 /opt/jdk/bin/java -D[Process Controller] -server -Dorg.jboss.boot.log.file=/var/log/jboss/192.168.10.0/process-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/192.168.10.0/configuration/logging.properties -jar /opt/jboss/jboss-modules.jar -mp /opt/jboss/modules org.jboss.as.process-controller -jboss-home /opt/jboss -jvm /opt/jdk/bin/java -mp /opt/jboss/modules -- -Dorg.jboss.boot.log.file=/var/log/jboss/192.168.10.0/host-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/192.168.10.0/configuration/logging.properties -server -- -default-jvm /opt/jdk/bin/java --domain-config domain.xml --host-config=host.xml -P file:///apps/jboss/192.168.10.0/configs/domain.properties

      jboss     8396  8382  0 08:40 ?        00:00:11 /opt/jdk/bin/java -D[Host Controller] -Dorg.jboss.boot.log.file=/var/log/jboss/192.168.10.0/host-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/192.168.10.0/configuration/logging.properties -server -jar /opt/jboss/jboss-modules.jar -mp /opt/jboss/modules -jaxpmodule javax.xml.jaxp-provider org.jboss.as.host-controller -mp /opt/jboss/modules --pc-address 127.0.0.1 --pc-port 46303 -default-jvm /opt/jdk/bin/java --domain-config domain.xml --host-config=host.xml -P file:///apps/jboss/192.168.10.0/configs/domain.properties -Djboss.home.dir=/opt/jboss

       

       

      2.3.    Adding JBoss users

       

      2.3.1    Adding the admin user

       

      The user admin is used to login to the administration website:

       

      root@dc : /opt/jboss/bin # ./add-user.sh

       

      What type of user do you wish to add?

      a) Management User (mgmt-users.properties)

      b) Application User (application-users.properties)

      (a):

       

      Enter the details of the new user to add.

      Realm (ManagementRealm) :

      Username : admin

      Password : <welkom>

      Re-enter Password : <welkom>

      Updated user 'admin' to file '/opt/jboss-eap-6.0.0/standalone/configuration/mgmt-users.properties'

      Updated user 'admin' to file '/opt/jboss-eap-6.0.0/domain/configuration/mgmt-users.properties'

      Is this new user going to be used for one AS process to connect to another AS process e.g. slave domain controller?

      yes/no? no

       

      You need this user when you want to administer the domain controller with jboss-cli.sh from somewhere else.

       

       

      2.3.2    Adding the slave user

       

      The user slaveuser is used by external node to login to the Domain Controller:

       

      root@dc : /opt/jboss/bin # ./add-user.sh

       

      What type of user do you wish to add?

      a) Management User (mgmt-users.properties)

      b) Application User (application-users.properties)

      (a):

       

      Enter the details of the new user to add.

      Realm (ManagementRealm) :

      Username : slaveuser

      Password : <welkom>

      Re-enter Password : <welkom>

      About to add user 'slaveuser' for realm 'ManagementRealm'

      Is this correct yes/no? yes

      Added user 'slaveuser' to file '/opt/jboss/standalone/configuration/mgmt-users.properties'

      Added user 'slaveuser' to file '/opt/jboss/domain/configuration/mgmt-users.properties'

      Is this new user going to be used for one AS process to connect to another AS process e.g. slave domain controller?

      yes/no? yes

       

      To represent the user add the following to the server-identities definition <secret value="d2Vsa29t" />

       

       

      =====================================

      CHAPTER 3: Installation of the slaves

      =====================================

       

      Come up with a unique name (here slave1) for a slave and repeat this chapter for as much slaves as you want to have in your architecture. Note that slaves can be anywhere (that is, on production servers, somewhere else on the internet, and even on your laptop). The slavenames have to be unique (you can use for instance a DNS-like name for bigger architectures).

       

      3.1.    A brief history of the installation of JBoss 7 for slaves.

       

      This is easy, just follow 2.1

       

      3.2.    Installing a slave server of the dc

       

      Since this is the same thing over and over again, we tell you how to do it on the applicationserver slave1 (192.168.20.0):

       

      3.2.1.    Adjusting host-slave.xml

       

      <?xml version='1.0' encoding='UTF-8'?>

       

      <host name="slave1" xmlns="urn:jboss:domain:1.3">

       

          <management>

              <security-realms>

                  <security-realm name="ManagementRealm">

                      <server-identities>

                          <secret value="${jboss.domain.login.password}"/>

                      </server-identities>

                      <authentication>

                          <local default-user="$local"/>

                          <properties path="mgmt-users.properties" relative-to="jboss.domain.config.dir"/>

                      </authentication>

                  </security-realm>

       

      ...

       

      There is some story here to tell, when you define it like this, you must offer a jboss.domain.login.password property during startup. Upshot is, this must be a cleartext property. If you are paranoid, you can work with:

       

      ...

                  <security-realm name="ManagementRealm">

                      <server-identities>

                          <secret value="d2Vsa29t"/>

                      </server-identities>

                      <authentication>

                          <local default-user="$local"/>

                          <properties path="mgmt-users.properties" relative-to="jboss.domain.config.dir"/>

                      </authentication>

                  </security-realm>

      ...

       

      The secret value is the one which was given to you in 2.3.2. Now to make this really a slave of the dc, adjust as follows:

       

      ...

          <domain-controller>

              <remote host="${jboss.domain.master.address}" port="${jboss.domain.master.port:9999}" security-realm="ManagementRealm" username="${jboss.domain.login.user}"/>

          </domain-controller>

      ...

       

      We use variables here, because we use a property file to feed our jboss process. If you don't want that, you can use the literal versions of that:

       

       

      3.2.2.    Starting the slave.

       

      The easiest way to start the domain controller is just fire up /opt/jboss/bin/domain.sh -b <bind-address> after setting JAVA_HOME to the correct value. Note that this is also the clumsiest way, since it starts in the foreground. Now there are plenty of ways to configure it to start in the background and barf into a console log instead of a console-window. Now start:

       

      root@slave1 # /opt/jboss/bin/domain.sh  --domain-config domain.xml --host-config=host-slave.xml -P file:///apps/jboss/slave1/configs/domain.properties

       

      with:

       

      root@slave1:/opt# cat /apps/jboss/alave1/configs/domain.properties

       

      jboss.bind.address=192.168.20.0

      jboss.bind.address.management=192.168.20.0

      jboss.socket.binding.port-offset=0

      jboss.domain.log.dir=/var/log/jboss/slave1

      jboss.domain.master.address=192.168.10.0

      jboss.domain.name=slave1

      jboss.domain.login.user=slaveuser

      jboss.domain.login.password=welkom

       

      We end up with

       

      root@slave1:/opt# ps -ef | grep jboss | grep -v grep

      jboss     6670     1  0 11:44 ?        00:00:00 /bin/sh /opt/jboss/bin/domain.sh --domain-config domain.xml --host-config=host-slave.xml -P file:///apps/jboss/fbewslave/configs/domain.properties

      jboss     6713  6670  0 11:44 ?        00:00:00 /opt/jdk/bin/java -D[Process Controller] -server -Dorg.jboss.boot.log.file=/var/log/jboss/fbewslave/process-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/fbewslave/configuration/logging.properties -jar /opt/jboss/jboss-modules.jar -mp /opt/jboss/modules org.jboss.as.process-controller -jboss-home /opt/jboss -jvm /opt/jdk/bin/java -mp /opt/jboss/modules -- -Dorg.jboss.boot.log.file=/var/log/jboss/fbewslave/host-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/fbewslave/configuration/logging.properties -server -- -default-jvm /opt/jdk/bin/java --domain-config domain.xml --host-config=host-slave.xml -P file:///apps/jboss/fbewslave/configs/domain.properties

      jboss     6728  6713  3 11:44 ?        00:00:04 /opt/jdk/bin/java -D[Host Controller] -Dorg.jboss.boot.log.file=/var/log/jboss/fbewslave/host-controller.log -Dlogging.configuration=file:/apps/jboss/profiles/fbewslave/configuration/logging.properties -server -jar /opt/jboss/jboss-modules.jar -mp /opt/jboss/modules -jaxpmodule javax.xml.jaxp-provider org.jboss.as.host-controller -mp /opt/jboss/modules --pc-address 127.0.0.1 --pc-port 37932 -default-jvm /opt/jdk/bin/java --domain-config domain.xml --host-config=host-slave.xml -P file:///apps/jboss/fbewslave/configs/domain.properties -Djboss.home.dir=/opt/jboss

       

       

      3.2.3.    Controlling if the slave is connected to the domain controller

       

      The slave is connected to the domain controller when you can see slave1 as a host in the jboss-cli as follows:

       

      root@dc:/opt/jboss/bin# ./jboss-cli.sh --controller=192.168.10.0 --connect

      [domain@192.168.10.0:9999 /] ls -l /host

      slave1

      master

       

       

      =================================

      CHAPTER 4: Creating a new profile

      =================================

       

      4.1.    Add a profile definition to the domain.xml

       

      Since it is not (yet) possible to copy a profile with the JBoss client, we have to copy a profile by hand:

       

      1.    Open /opt/jboss/domain/configuration/domain.xml on the domain crontroller.

      2.    When you want a ha-typed profile, copy all the entries between:

       

      <profile name="ha">

      ...

      </profile>

       

          to a new entry between the <profiles> ... </profiles> tags, for example:

       

      <profile="cluster1">

      ...

      </profile>

       

       

      Remark:

       

      The following properties of our architecture must be set on the profile level:

       

      * The balancer-name, this is essentially what you need to put in the Apache Virtual Host in the <Proxy> ... </Proxy> tags.

      * The jdbc-driver entries (that is, when you need one of-course, but an application without its data is like ...).

      * The datasource entries.

      * Access logging of the web system.

       

       

      4.2.    Control if the profile is there

       

      After hacking (eh adjusting) the domain.xml of the domain controller, restart the domain crontroller and check whether the profile is there:

       

      [domain@145.78.121.33:9999 /] ls -l /profile

      cluster1

      cluster2

      default

      full

      full-ha

      ha

       

      We see that we have repeat 4.1 with a cluster-name cluster2, since we are going to serve two (seperated clusters).

       

      =============================================================

      CHAPTER 5: Configuring the architecture for running a cluster

      =============================================================

       

      5.1.    A script to configure to configure the profile and the server-group

       

      Remember: allthough it is not a 1-1 map, you can see the combination profile + server-group as a simple definition of what we had in JBoss 5 for a cluster.

       

      Safe the following to a text file (say /tmp/cluster1.cli).

       

       

      #

      # Setting the balancer name in the profile

      #

       

      /profile=cluster1/subsystem=modcluster/mod-cluster-config=configuration:write-attribute(name=balancer, value="cluster1")

       

      #

      # Creating the server group

      #

       

      /server-group=cluster1-server-group:add(profile=cluster1, socket-binding-group=ha-sockets, socket-binding-port-offset=0)

       

      #

      # Creating JDBC Driver entries and datasource entry for cluster1

      # Datasource definition shown for Oracle

      #

       

      /profile=cluster1/subsystem=datasources/jdbc-driver=mysql:add(driver-name="mysql",driver-module-name="com.mysql")

      /profile=cluster1/subsystem=datasources/jdbc-driver=oracle:add(driver-name="oracle",driver-module-name="com.oracle.ojdbc6")

       

      data-source --name=cluster1_DS \

      --connection-url="jdbc:oracle:thin:@databaseserver:port:database" \

      --jndi-name="java:jboss/cluster1_DS" \

      --driver-name="oracle" \

      --user-name="cluster1_appl" --password="password" \

      --use-java-context="true" \

      --min-pool-size="0" \

      --max-pool-size="64" \

      --idle-timeout-minutes="30" \

      --background-validation="false" \

      --background-validation-millis="1" \

      --validate-on-match="true" \

      --allocation-retry="0" \

      --share-prepared-statements="false" \

      --set-tx-query-timeout="false" \

      --query-timeout="0" \

      --use-try-lock="0" \

      --url-delimiter="|" \

      --profile=cluster1 add

       

      #

      # Creating application properties entry (if needed of course)

      #

       

      /server-group=cluster1-server-group/system-property=PROPERTY_FILE:add(value="/home/jboss/data/cluster1.properties")

       

      #

      # Creating access log entry

      #

       

      /profile=cluster1/subsystem=web/virtual-server=default-host/access-log=configuration:add(extended=false, pattern="%a %t %H %p %U %s ", prefix=false, resolve-hosts=false, rotate=true

       

       

      Of course there could be more or less entries in this file (just put there what you want), after this:

       

      root@dc # cd /opt/jboss/bin

      root@dc # /jboss-cli.sh --controller=192.168.10.0 --connect --file=/tmp/cluster1.cli

       

       

      5.2.    Creating and configuration server-configs

       

      A server-group contains serveral server-configs, and the last ones are synonym with what we had as clusternodes in the good ol' dagys. These server-configs can be running everywhere where there is a JBoss slave is installed.  If you have not done so, follow 3.2.3 and check if the slave is there. Then (again in the jboss-cli):

       

      [domain@192.168.10.0:9999 /] /host=slave1/server-config=node11:add(auto-start=true, group=cluster1-server-group, socket-binding-group=ha-sockets, socket-binding-port-offset=0)

      {

          "outcome" => "success",

          "result" => undefined

      }

       

      5.3.    Starting the nodes and where are my files

       

      You can start, stop or restart the server-configs as follows:

       

      [domain@192.168.10.0:9999 /] /host=slave1/server-config=node11:start

      {

          "outcome" => "success",

          "result" => "STARTING"

      }

       

      On slave1 (we can now see something like this:

       

      root@slave1:/home/wnoordui# tree /opt/jboss/domain/servers/node11/

      /opt/jboss/domain/servers/node11/

      |-- data

      |-- log

      |   |-- accesslog

      |   |   `-- access_log.2013-02-13

      |   |-- boot.log

      |   |-- server.log

      |   `-- server.log.2013-02-11

      `-- tmp

       

       

      5.4.    On enabling datasources and testing them

       

      Enable a datasource and test if it's there:

       

      [domain@192.168.10.0:9999 /] /profile=cluster1/subsystem=datasources/data-source=cluster1_DS:enable

      {

          "outcome" => "success",

          "result" => undefined,

          "server-groups" => {"cluster1-server-group" => {"host" => {"slave1" => {"node11" => {"response" => {

              "outcome" => "success",

              "result" => undefined

          }}}}}}

      }

       

      [domain@192.168.10.0:9999 /] /host=slave1/server=node11/subsystem=datasources/data-source=cluster1_DS:test-connection-in-pool

      {

          "outcome" => "success",

          "result" => [true]

      }

       

      =================================================

      CHAPTER 6: Deploying and testing the applications

      =================================================

       

      6.1.    Deploy an application

       

      This is simple, suppose we have a /tmp/testapp.war which contains the application code. Then:

       

      [domain@192.168.10.0:9999 /] deploy  /tmp/testapp.war --server-groups=cluster1-server-group

       

      and follow the logfiles on one of the nodes of cluster1-server-group (node11 would be a great choice)/

       

       

      6.2.    Test the application

       

      For me: lynx http://slave1:8080/testapp works fine, but if you are gui-impaired you can you iceweazel, firefox or (even) ie.

       

      =====================================

      CHAPTER 7: What we have not discussed

      =====================================

       

      In this document only the simplest way of getting clusters or clusterlike architectures running on a domain cluster. I haven't delved into things like hibernation, messaging, etc. Also you can read somewhere else (for example https://community.jboss.org/thread/162859 in CHAPTER 8 there), how to setup an Apache / mod cluster for this thing

        • 1. Re: Tutorial domain clustering in JBoss 7 / EAP 6
          Radoslav Husar Master

          Neat. Lets make this into an article rather than forum post -- okay? I can do the conversion.

          • 2. Re: Tutorial domain clustering in JBoss 7 / EAP 6
            Wolf-Dieter Fink Master

            Remember that a domain is a total different concept. So please stay clear with that to not confuse somebody.

             

            • A domain is to manage/controll/configure several server instances across several physical boxes.
            • A cluster is a bunch of server-instances which share application requests (load balancing, failover).

             

            So a domain setup may contain non-cluster, one-cluster or many clusters. That depends on the used profile and the settings for JGroups communication.

            If you use the same JGroups multicast-address (default) the different servers will find each other and build a cluster.

            • 3. Re: Tutorial domain clustering in JBoss 7 / EAP 6
              kzivkovic Newbie

              In jboss-as-7.1.1.Final.zip my

              c:\jboss-as-7.1.1.Final\domain\configuration\host-slave.xml

               

              Starts with:

              <host xmlns="urn:jboss:domain:1.2">

              and not with

              <host xmlns="urn:jboss:domain:1.3"> that is case in example you gave.

               

              Therefore I get:

               

              [Host Controller] 11:14:35,202 ERROR [org.jboss.as.host.controller] (Controller Boot Thread) JBAS010932: Caught exception during boot: org.jboss.as.controller.persistence.Configura

              tionPersistenceException: JBAS014676: Failed to parse configuration

              [Host Controller]       at org.jboss.as.controller.persistence.XmlConfigurationPersister.load(XmlConfigurationPersister.java:141) [jboss-as-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.HostControllerConfigurationPersister.load(HostControllerConfigurationPersister.java:158) [jboss-as-host-controller-7.1.1.Fin

              al.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.DomainModelControllerService.boot(DomainModelControllerService.java:315) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Fin

              al]

              [Host Controller]       at org.jboss.as.controller.AbstractControllerService$1.run(AbstractControllerService.java:155) [jboss-as-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at java.lang.Thread.run(Thread.java:662) [rt.jar:1.6.0_23]

              [Host Controller] Caused by: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[31,8]

              [Host Controller] Message: JBAS014788: Unexpected attribute 'username' encountered

              [Host Controller]       at org.jboss.as.controller.parsing.ParseUtils.unexpectedAttribute(ParseUtils.java:104) [jboss-as-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.parseRemoteDomainControllerAttributes(HostXml.java:832) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Fina

              l]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.parseRemoteDomainController1_1(HostXml.java:778) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.parseDomainController(HostXml.java:745) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.readHostElement_1_1(HostXml.java:392) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.readElement(HostXml.java:126) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.as.host.controller.parsing.HostXml.readElement(HostXml.java:103) [jboss-as-host-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       at org.jboss.staxmapper.XMLMapperImpl.processNested(XMLMapperImpl.java:110) [staxmapper-1.1.0.Final.jar:1.1.0.Final]

              [Host Controller]       at org.jboss.staxmapper.XMLMapperImpl.parseDocument(XMLMapperImpl.java:69) [staxmapper-1.1.0.Final.jar:1.1.0.Final]

              [Host Controller]       at org.jboss.as.controller.persistence.XmlConfigurationPersister.load(XmlConfigurationPersister.java:133) [jboss-as-controller-7.1.1.Final.jar:7.1.1.Final]

              [Host Controller]       ... 4 more

              [Host Controller]

              [Host Controller] 11:14:35,294 FATAL [org.jboss.as.host.controller] (Controller Boot Thread) JBAS010933: Host Controller boot has failed in an unrecoverable manner; exiting. See pr

              evious messages for details.

              [Host Controller] 11:14:35,331 INFO  [org.jboss.as] (MSC service thread 1-2) JBAS015950: JBoss AS 7.1.1.Final "Brontes" stopped in 6ms

              11:14:35,673 INFO  [org.jboss.as.process.Host Controller.status] (reaper for Host Controller) JBAS012010: Process 'Host Controller' finished with an exit status of 99

              11:14:35,683 INFO  [org.jboss.as.process] (Thread-8) JBAS012016: Shutting down process controller

              11:14:35,688 INFO  [org.jboss.as.process] (Thread-8) JBAS012015: All processes finished; exiting

               

              Help is appreciated...

              • 4. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                Wolf-Dieter Fink Master

                Hello,

                welcome to the forum.

                 

                You can not use a configuration from a newer version (this is the URN:domain x.x). The second issue is because you change the version but in this case the XML is not according to the schema.

                If you need another example try this ejb-multi-server quickstart.

                • 5. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                  kzivkovic Newbie

                  Hello Dieter,

                   

                  I am completely aware that "you cannot use configuration from a newer version...".

                  I just claim that with downloading jboss-as-7.1.1.Final.zip I didn't get host-slave.xml that contained:

                  <host xmlns="urn:jboss:domain:1.3" line.

                   

                  It contained

                  <host xmlns="urn:jboss:domain:1.2"

                   

                  I just followed the instructions in article you gave and wanted to warn you about this discrepancy.

                   

                  I also tried to run ejb-multi-server quickstart, but I got:


                  #95 /server-group=quickstart-ejb-multi-appWeb-server:add(profile=default-web,socket-binding-group=standard-sockets-web)

                  #96 /server-group=quickstart-ejb-multi-appWeb-server/jvm=default:add()

                  #97 /host=master/server-config=app-web:add(auto-start=true, group=quickstart-ejb-multi-appWeb-server, socket-binding-port-offset=300)

                  Failed to execute batch: JBAS010850: No handler for operation add at address [

                      ("profile" => "default-web"),

                      ("subsystem" => "naming"),

                      ("service" => "remote-naming")

                  ]

                   

                  But maybe this is off topic... thanks for reply.

                  • 6. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                    Vivek Mittal Newbie

                    Hello,

                    I am also facing the same issue. How did you resolve it ?

                    • 7. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                      Wolf-Dieter Fink Master

                      You should use the latest version from github and read the README "Modify the CLI Scripts (if you are running JBoss Enterprise Application Platform 6.0 or JBoss AS7.1 servers"

                      This is because the scripts are provided for use with the latest EAP and AS7.2 version and have issues if you use former versions.

                      • 8. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                        Gulam Samdani Novice

                        Hi,

                         

                        can you me a description about

                         

                        1. Difference between Domain management vs Clustering

                        2. when use clustering / when use domain management ?

                        3. what are the benefit of domain management over clustering ?

                        • 9. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                          Wolf-Dieter Fink Master

                          1.

                          domain is an administation/configuration management to manage configurations and deployments from a single point

                          cluster is a runtime environment for application to have failover and loadbalancing

                          domain and cluster are complete different

                          2.

                          Therefore clusters are used if you have huge applications to use multiple server for loadbalancing and be able to failover without application downtime

                          Domain is used to simplify the administration of your servers and deployments

                          3.

                          see above

                          • 10. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                            Gulam Samdani Novice

                            Hi,

                            is it possible to use combine two item (domain + cluster) in any use case ?

                            • 11. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                              Radoslav Husar Master

                              is it possible to use combine two item (domain + cluster) in any use case ?

                              Yes, since they are orthogonal. You can have clustering regardless whether you manage server standalone or via a domain controller. Just make sure to use the *-ha profiles.

                              • 13. Re: Tutorial domain clustering in JBoss 7 / EAP 6
                                Sergey Pilipenko Newbie

                                We were planning on using JON with agents installed on each OS where JBoss is running - agents allow start and stop of servers and single point of admin from JON.

                                 

                                How does this compare to domains? Do I need both - domain and JON agents on the same OS? Which would I use to monitor, start/stop servers and deploy apps - JON or domain controller?

                                 

                                Domain controller seems to offer configuration management capabilities - how does this correlate to JON and its inventory database?