UsingMod_jk1.2WithJBoss

    Using mod_jk 1.2.x with JBoss/Tomcat bundle and Apache2

    Quick Overview

     

    1. Download Apache2

    2. Download modjk 1.2.x (At least 1.2.27 suggested)

    3. Change the main Apache config to include modjk config

    4. Create the modjk config

    5. Configure the modjk workers (which JBoss/Tomcat nodes Apache uses)

    6. Configure the Apache URIs served by modjk (the applications served by JBoss/Tomcat)

    7. Restart Apache

    8. Configure Tomcat (Give each JBoss/Tomcat a jvmRoute for session stickness)

    9. Restart JBoss

    10. Test it

     

    mod_proxy

    Most httpd-2.2.x actual distributions (x>=6) have a decent AJP proxying and don't require to compile an external module. See

    http://community.jboss.org/wiki/usingmodproxywithjboss for more information.

     

    More Details

     

    This wiki outlines the various steps required to install a basic load-balancing solution based on JBoss/Tomcat and mod_jk 1.2.

     

    Step 1: Download Apache2 Web Server

     

    Get the latest Apache2 package from Apache.org and install it. We require no special configuration, just use the default settings.

    In the following steps, APACHE_HOME will represent the Apache install directory.

     

    Step 2: Download mod_jk 1.2.x

     

    Download the latest package available from Tomcats's 'Download Tomcat connector section' page . Always download the latest stable release if possible.

     

    Rename the lib mod_jk.so and drop it in APACHE_HOME/modules directory.

     

    NOTE: Don't use any release prior to mod_jk 1.2.15. Earlier releases are fairly buggy.

     

    +

    Note: Darwin Ports supports the installation of mod_jk on OS X. See http://darwinports.opendarwin.org/ for more info.

    +

     

    Step 3: Setup Apache to use modjk

     

    Add this line at the very bottom in APACHE_HOME/conf/httpd.conf :

    # Include mod_jk configuration file
    Include conf/mod-jk.conf

     

    Step 4: Create the modjk config

     

    Under APACHE_HOME/conf, create mod-jk.conf and populate it as follows:

    # Load mod_jk module
    # Specify the filename of the mod_jk lib
    LoadModule jk_module modules/mod_jk.so
    
    # Where to find workers.properties
    JkWorkersFile conf/workers.properties
    
    # Where to put jk logs
    JkLogFile logs/mod_jk.log
    
    # Set the jk log level [debug/error/info]
    JkLogLevel info
    
    # Select the log format
    JkLogStampFormat "[%a %b %d %H:%M:%S %Y]"
    
    # JkOptions indicates to send SSK KEY SIZE
    # Notes: 
    # 1) Changed from +ForwardURICompat. 
    # 2) For mod_rewrite compatibility, use +ForwardURIProxy (default since 1.2.24)
    # See http://tomcat.apache.org/security-jk.html  
    JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories
    
    # JkRequestLogFormat
    JkRequestLogFormat "%w %V %T"
    
    # Mount your applications
    JkMount /__application__/* loadbalancer
    # Let Apache serve the images
    JkUnMount /__application__/images/* loadbalancer
    
    # You can use external file for mount points.
    # It will be checked for updates each 60 seconds.
    # The format of the file is: /url=worker
    # /examples/*=loadbalancer
    JkMountFile conf/uriworkermap.properties
    
    # Add shared memory.
    # This directive is present with 1.2.10 and
    # later versions of mod_jk, and is needed for
    # for load balancing to work properly
    # Note: Replaced JkShmFile logs/jk.shm due to SELinux issues. Refer to 
    # https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=225452
    JkShmFile run/jk.shm
    
    # Add jkstatus for managing runtime data
    <Location /jkstatus>
    JkMount status
    Order deny,allow
    Deny from all
    Allow from 127.0.0.1
    </Location>

     

    mod_jk is ready to forward requests to JBoss instances. We need now to setup the workers

     

    Note: As of mod_jk 1.2.6+ you need to include "JkMountCopy all" in globals if you intend to specify global JkMount's or JkMountFile's instead of per VirtualHost. If you do not want to copy the same JkMount/JkMountFile for each VirtualHost, you can specify "JkMountCopy On" inside the VirtualHost directive.

     

    See entry in: http://tomcat.apache.org/connectors-doc/reference/apache.html

    -


     

    Step 5: Configuring workers

     

    Under APACHE_HOME/conf, create workers.properties and populate it as follows:

    # Define list of workers that will be used
    # for mapping requests
    # The configuration directives are valid
    # for the mod_jk version 1.2.18 and later
    #
    worker.list=loadbalancer,status
    
    
    # Define Node1
    # modify the host as your host IP or DNS name.
    worker.node1.port=8009
    worker.node1.host=node1.mydomain.com
    worker.node1.type=ajp13
    worker.node1.lbfactor=1
    worker.node1.prepost_timeout=10000 #Not required if using ping_mode=A
    worker.node1.connect_timeout=10000 #Not required if using ping_mode=A
    worker.node1.ping_mode=A #As of mod_jk 1.2.27
    # worker.node1.connection_pool_size=10 (1)
    
    # Define Node2
    # modify the host as your host IP or DNS name.
    worker.node2.port=8009
    worker.node2.host= node2.mydomain.com
    worker.node2.type=ajp13
    worker.node2.lbfactor=1
    worker.node2.prepost_timeout=10000 #Not required if using ping_mode=A
    worker.node2.connect_timeout=10000 #Not required if using ping_mode=A
    worker.node2.ping_mode=A #As of mod_jk 1.2.27
    # worker.node1.connection_pool_size=10 (1)
    
    # Load-balancing behaviour
    worker.loadbalancer.type=lb
    worker.loadbalancer.balance_workers=node1,node2
    
    # Status worker for managing load balancer
    worker.status.type=status

     

    Important: Please review http://tomcat.apache.org/connectors-doc/reference/workers.html for the directive descriptions. Especially lookout for the comments on cachsize for Apache 1.3.x.

     

    (1) You should only set the connection_pool_size if the number of allowed connection to the Httpd is higher than maxThreads in server.xml

     

    If you specify worker.loadbalancer.sticky_session=Off, each request will be load balanced between node1 and node2. But when a user opens a Session on one server, it is a good idea to always forward this user's requests to the same server. Otherwise the user's session data would need to be synchronized between both servers. This is called a "sticky session", as the client is always using the same server he reached on his first request.

    Session stickiness is enabled by default.

     

    Side Note: a non-loadbalanced setup with a single node required the "worker.list=node1" entry before mod_jk would function correctly. Without this setting I would only get a 500 error and no other useful messages in log or otherwise. -Harlequin516

     

    Side Note: I tried both loadbalanced and single node methods on Fedora 4. Both setups causing jk.shm errno=13 and jk-runtime-status errno=13 in the mod_jk.log. Could only get 500 errors. As a last resort disabled selinux on apache server. Restarted service and connection was made first try. -paulbrown

     

     

    Step 6: Create the URI to worker map file

     

    Create a uriworkermap.properties file in the APACHE_HOME/conf directory. This file should contain the URL mappings you want Apache to forward to Tomcat. The format of the file is /url=worker_name. To get things started, paste this example into the file you created:

    # Simple worker configuration file
    #
    
    # Mount the Servlet context to the ajp13 worker
    /jmx-console=loadbalancer
    /jmx-console/*=loadbalancer
    /web-console=loadbalancer
    /web-console/*=loadbalancer
    /myapp/*=loadbalancer
    !/myapp/images/*=loadbalancer

    This will configure mod_jk to forward requests for the /jmx-console, /web-console and /myapp contexts to JBoss Web. The '!' at the beginning of the last line results in the URLs for the images dir in the myapp context not being forwarded. Instead httpd will handle them directly (which means they must be available on the httpd server).

     

    Step 7: Restart Apache

     

     

    Step 8: Configure Tomcat

     

    To complete the configuration, we also need to name each node to match the names specified in workers.properties.

     

    To do this, edit the server.xml file. Where server.xml is located depends on the version of JBoss AS:

     

    • In JBoss 5, it's $JBOSS_HOME/server/all/deploy/jbossweb.sar/server.xml
    • In JBoss 4.2.x and EAP 4.x, it's $JBOSS_HOME/server/all/deploy/jboss-web.deployer/server.xml
    • In earlier releases it's $JBOSS_HOME/server/all/deploy/jbossweb-tomcatXX.sar/server.xml where XX is 40, 50, 55 etc depending on the Tomcat version embedded in the AS.

     

    (In the examples above, replace /all/ with the name of the AS configuration you are running.)

     

    Locate the <Engine/.> element and add an attribute jvmRoute:

    <Engine name="jboss.web" defaultHost="localhost" jvmRoute="node1">
    .
    </Engine>

    The jvmRoute attribute value must match the name specified in workers.properties.

     

    In the server.xml file, make sure that the AJP 1.3 Connector is uncommented, e.g.:

     

    <!-- A AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" address="${jboss.bind.address}"
          emptySessionPath="true" enableLookups="false" redirectPort="8443" 
          protocol="AJP/1.3" connectionTimeout="600000" maxThreads="200"/>

     

    If you are only accepting requests via mod_jk, you can comment out the regular HTTP Connector; Tomcat then won't listen on port 8080.

     

    Step 9: Activate the JvmRouteValve in JBoss (not needed with Tomcat Standalone)

     

    Finally, we need to tell JBoss to add a special valve that detects when failover of a session from a distributable webapp has occurred. This JvmRouteValve ensures a new session cookie is emitted that includes the jvmRoute of the server that is now handling the session.

     

    This configuration step is only needed with JBoss 4.2.x and earlier; beginning with JBoss AS 5 the application server uses the existence of a jvmRoute configuration in server.xml as an indication that it should add the JvmRouteValve.

     

    To do this, edit the jboss-service.xml file for the JBoss Web service. Where this is located depends on the version of JBoss AS:

     

    • In JBoss 5, this step isn't needed.
    • In JBoss 4.2.x and EAP 4.x, it's $JBOSS_HOME/server/all/deploy/jboss-web.deployer/META-INF/jboss-service.xml
    • In earlier releases it's $JBOSS_HOME/server/all/deploy/jbossweb-tomcatXX.sar/META-INF/jboss-service.xml where XX is 40, 50, 55 etc depending on the Tomcat version embedded in the AS.

     

    Locate the <attribute> element with a name of UseJK, and set its value to "true":

    <attribute name="UseJK">true</attribute>

     

     

    Step 10: Restart JBoss AS.

     

    Step 11: Access the JBoss AS web-console through Apache by browsing to http://localhost/web-console and you should see the JBoss web console page.

     

    -


    Note: to use mod_jk with Jboss 2 (e.g. jboss 2.4.6), you must edit jboss.jcml. Add the 'jvmRoute="myWorker"' to the Engine element under the EmbeddedCatalinaSX mbean.

    -


    -


    Note: You may need to use VirtualHost in you mod-jk.conf. For example:

    Instead of just

    JkMount /jmx-console   loadbalancer
    JkMount /jmx-console/* loadbalancer

    try

    <VirtualHost host.name.or.IP>
      ServerName host.name.or.IP
    
      JkMount /jmx-console loadbalancer
      JkMount /jmx-console/* loadbalancer
    </VirtualHost>

    -


     

    Resources

     

    JBoss Clustering Guide: Additional details about HTTP Session replication, workers.properties and other goodies.

     

    The Apache Tomcat Connector - Generic HowTo

     

    The Apache Tomcat Connector - Documentation Index

     

    The Apache Tomcat Connector - workers.properties configuration

     

    The Apache Tomcat Connector - Configuring Apache

     

    The Apache Tomcat Connector - Configuring IIS

     

    Configuring Tomcat and Apache With JK 1.2

     

    Tomcat - Workers HowTo

     

    Tomcat user-mail archive

     

    mod_jk FAQ

     

    What is an optimized mod_jk configuration for use in Apache with JBoss?

     

    Apache -> JBoss Loadbalancing Configuration Generator

     

    Using mod_jk 1.2 with a Firewall

     

    Using mod_jk 1.2 with JBoss & Microsoft IIS

     

    Using mod_jk 1.2 with JBoss & Microsoft IIS7

     

    Using mod_jk 1.2 with JBoss & Netscape / Iplanet / SunOne

     

    Fronting Tomcat with Apache, White paper by Mladen Turk

     

     

     

     

     

    Referenced by: