[forge-dev] Hello World Template

Hi all,

I'm starting to get a bit more confident with Roaster... and now I would

like to add templating. If I'm right, Roaster is nice to add bits and

pieces of Java here and there, but it's better to use Templates when there

is a lot of code, and mix templating and Roaster for better code

customization.

Is there a sample I could use to write a Hello Word ? A template with an

"engine" that uses Roaster to add Java code to the template.

Thanks

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Hi Antonio,

Roaster currently only maintains a class structure (add/remove fields, methods, interfaces,etc), not code (method bodies) at the moment.

There is a JIRA to allow that though.

See the templates addon README to learn how to generate content from a template.

Best Regards,

George Gastaldi

Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]> escreveu:

Hi all,

I'm starting to get a bit more confident with Roaster... and now I would like to add templating. If I'm right, Roaster is nice to add bits and pieces of Java here and there, but it's better to use Templates when there is a lot of code, and mix templating and Roaster for better code customization.

Is there a sample I could use to write a Hello Word ? A template with an "engine" that uses Roaster to add Java code to the template.

Thanks

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

Hum...

In the README there is :

@Inject private TemplateProcessorFactory factory

But is there a way to use the templating from a Main class ? If I use

Forge, I have Furnace as a container, and I was trying something like this,

but it doesn't work :

Furnace furnace = startFurnace();

Imported imported =

furnace.getAddonRegistry(TemplateProcessorFactory.class);

TemplateProcessorFactory factory = imported.get();

Any simple Hello World from a Main class and a pom.xml ?

Thanks

Antonio

2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

Hi Antonio,

Roaster currently only maintains a class structure (add/remove fields,

methods, interfaces,etc), not code (method bodies) at the moment.

There is a JIRA to allow that though.

See the templates addon README to learn how to generate content from a

template.

Best Regards,

George Gastaldi

Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

escreveu:

Hi all,

I'm starting to get a bit more confident with Roaster... and now I would

like to add templating. If I'm right, Roaster is nice to add bits and

pieces of Java here and there, but it's better to use Templates when there

is a lot of code, and mix templating and Roaster for better code

customization.

Is there a sample I could use to write a Hello Word ? A template with an

"engine" that uses Roaster to add Java code to the template.

Thanks

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Why it doesn't work? Is any exception being thrown?

Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]> escreveu:

Hum...

In the README there is :

@Inject private TemplateProcessorFactory factory

But is there a way to use the templating from a Main class ? If I use Forge, I have Furnace as a container, and I was trying something like this, but it doesn't work :

Furnace furnace = startFurnace();

Imported<TemplateProcessorFactory> imported = furnace.getAddonRegistry(TemplateProcessorFactory.class);

TemplateProcessorFactory factory = imported.get();

Any simple Hello World from a Main class and a pom.xml ?

Thanks

Antonio

2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>> Hi Antonio,

>>

>> Roaster currently only maintains a class structure (add/remove fields, methods, interfaces,etc), not code (method bodies) at the moment.

>>

>> There is a JIRA to allow that though.

>>

>> See the templates addon README to learn how to generate content from a template.

>>

>> Best Regards,

>>

>> George Gastaldi

>>

>>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]> escreveu:

>>>

>>

>>> Hi all,

>>>

>>> I'm starting to get a bit more confident with Roaster... and now I would like to add templating. If I'm right, Roaster is nice to add bits and pieces of Java here and there, but it's better to use Templates when there is a lot of code, and mix templating and Roaster for better code customization.

>>>

>>> Is there a sample I could use to write a Hello Word ? A template with an "engine" that uses Roaster to add Java code to the template.

>>>

>>> Thanks

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

Good old NPE ;o)

I'm not running the code into a container, so @Inject does not work. In the

readme there is the addonRegistry method. In all the samples, the registery

is injected... but how do I use all that with a good old Main ?

2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

Why it doesn't work? Is any exception being thrown?

Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

escreveu:

Hum...

In the README there is :

@Inject private TemplateProcessorFactory factory

But is there a way to use the templating from a Main class ? If I use

Forge, I have Furnace as a container, and I was trying something like this,

but it doesn't work :

Furnace furnace = startFurnace();

Imported<TemplateProcessorFactory> imported =

furnace.getAddonRegistry(TemplateProcessorFactory.class);

TemplateProcessorFactory factory = imported.get();

Any simple Hello World from a Main class and a pom.xml ?

Thanks

Antonio

>

2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>> Hi Antonio,

>>

>> Roaster currently only maintains a class structure (add/remove fields,

>> methods, interfaces,etc), not code (method bodies) at the moment.

>>

>> There is a JIRA to allow that though.

>>

>> See the templates addon README to learn how to generate content from a

>> template.

>>

>> Best Regards,

>>

>> George Gastaldi

>>

>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

>> escreveu:

>>

>> Hi all,

>>

>> I'm starting to get a bit more confident with Roaster... and now I would

>> like to add templating. If I'm right, Roaster is nice to add bits and

>> pieces of Java here and there, but it's better to use Templates when there

>> is a lot of code, and mix templating and Roaster for better code

>> customization.

>>

>> Is there a sample I could use to write a Hello Word ? A template with an

>> "engine" that uses Roaster to add Java code to the template.

>>

>> Thanks

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Your code should work, you can't use @Inject outside Furnace environment.  Not sure what's going on, need to investigate a little further

Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]> escreveu:

Good old NPE ;o)

I'm not running the code into a container, so @Inject does not work. In the readme there is the addonRegistry method. In all the samples, the registery is injected... but how do I use all that with a good old Main ?

2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>> Why it doesn't work? Is any exception being thrown?

>>

>>> Em 30/03/2014, às 17:14, Antonio Goncalves  https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

So it might be my pom.xml

Where do you get @Inject from ? Just from javax.inject:javax.inject ? Wich

Furnace dependencies do you need ?

2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

Your code should work, you can't use @Inject outside Furnace environment.

Not sure what's going on, need to investigate a little further

Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

escreveu:

Good old NPE ;o)

I'm not running the code into a container, so @Inject does not work. In

the readme there is the addonRegistry method. In all the samples, the

registery is injected... but how do I use all that with a good old Main ?

>

2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>> Why it doesn't work? Is any exception being thrown?

>>

>> Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

>> escreveu:

>>

>> Hum...

>>

>> In the README there is :

>>

>> @Inject private TemplateProcessorFactory factory

>>

>> But is there a way to use the templating from a Main class ? If I use

>> Forge, I have Furnace as a container, and I was trying something like this,

>> but it doesn't work :

>>

>> Furnace furnace = startFurnace();

>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>> TemplateProcessorFactory factory = imported.get();

>>

>> Any simple Hello World from a Main class and a pom.xml ?

>>

>> Thanks

>> Antonio

>>

>>

>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>

>>> Hi Antonio,

>>>

>>> Roaster currently only maintains a class structure (add/remove fields,

>>> methods, interfaces,etc), not code (method bodies) at the moment.

>>>

>>> There is a JIRA to allow that though.

>>>

>>> See the templates addon README to learn how to generate content from a

>>> template.

>>>

>>> Best Regards,

>>>

>>> George Gastaldi

>>>

>>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

>>> escreveu:

>>>

>>> Hi all,

>>>

>>> I'm starting to get a bit more confident with Roaster... and now I would

>>> like to add templating. If I'm right, Roaster is nice to add bits and

>>> pieces of Java here and there, but it's better to use Templates when there

>>> is a lot of code, and mix templating and Roaster for better code

>>> customization.

>>>

>>> Is there a sample I could use to write a Hello Word ? A template with an

>>> "engine" that uses Roaster to add Java code to the template.

>>>

>>> Thanks

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>  | Devoxx France <http://www.devoxx.fr/>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>

>>

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

Here is my code. I think it's my dependencies that are not right, because

resourceFactory is not injected so I get a NPE

*public class *RestEndpoint {

    @Inject

    *private *TemplateProcessorFactory factory;

    @Inject

    ResourceFactory resourceFactory;

    *public static void *main(String[] args) *throws *IOException {

        *new *RestEndpoint().doIt();

    }

    *private void *doIt() *throws *IOException {

        Resource templateResource = resourceFactory

.create(getClass().getResource("EndpointWithDTO.jv"));

        Template template = *new *FreemarkerTemplate(templateResource);

*// Mark this resource as a Freemarker template         *TemplateProcessor

processor = factory.fromTemplate(template);

        Map<String,Object> params = *new *HashMap<String,Object>();

*//Could be a POJO also.         params.put("name"*, "JBoss Forge");

        String output = processor.process(params);

*// should return "Hello JBoss Forge".         System.out*

.println(output);

    }

}

2014-03-30 22:36 GMT+02:00 Antonio Goncalves <[e-mail]>:

So it might be my pom.xml

Where do you get @Inject from ? Just from javax.inject:javax.inject ? Wich

Furnace dependencies do you need ?

>

2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

Your code should work, you can't use @Inject outside Furnace environment.

>>  Not sure what's going on, need to investigate a little further

>>

>> Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

>> escreveu:

>>

>> Good old NPE ;o)

>>

>> I'm not running the code into a container, so @Inject does not work. In

>> the readme there is the addonRegistry method. In all the samples, the

>> registery is injected... but how do I use all that with a good old Main ?

>>

>>

>> 2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>>

>>> Why it doesn't work? Is any exception being thrown?

>>>

>>> Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

>>> escreveu:

>>>

>>> Hum...

>>>

>>> In the README there is :

>>>

>>> @Inject private TemplateProcessorFactory factory

>>>

>>> But is there a way to use the templating from a Main class ? If I use

>>> Forge, I have Furnace as a container, and I was trying something like this,

>>> but it doesn't work :

>>>

>>> Furnace furnace = startFurnace();

>>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>>> TemplateProcessorFactory factory = imported.get();

>>>

>>> Any simple Hello World from a Main class and a pom.xml ?

>>>

>>> Thanks

>>> Antonio

>>>

>>>

>>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>>

>>>> Hi Antonio,

>>>>

>>>> Roaster currently only maintains a class structure (add/remove fields,

>>>> methods, interfaces,etc), not code (method bodies) at the moment.

>>>>

>>>> There is a JIRA to allow that though.

>>>>

>>>> See the templates addon README to learn how to generate content from a

>>>> template.

>>>>

>>>> Best Regards,

>>>>

>>>> George Gastaldi

>>>>

>>>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

>>>> escreveu:

>>>>

>>>> Hi all,

>>>>

>>>> I'm starting to get a bit more confident with Roaster... and now I

>>>> would like to add templating. If I'm right, Roaster is nice to add bits and

>>>> pieces of Java here and there, but it's better to use Templates when there

>>>> is a lot of code, and mix templating and Roaster for better code

>>>> customization.

>>>>

>>>> Is there a sample I could use to write a Hello Word ? A template with

>>>> an "engine" that uses Roaster to add Java code to the template.

>>>>

>>>> Thanks

>>>>

>>>> --

>>>> Antonio Goncalves

>>>> Software architect and Java Champion

>>>>

>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>

>>>

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>  | Devoxx France <http://www.devoxx.fr/>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>

>>

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[ivan_stefanov]

Hi Antonio,

As far as I can see, in your main class you are not inside the Furnace

container, you are rather on you own. That is why nobody has injected you

your dependencies.

Cheers,

Ivan

On Sun, Mar 30, 2014 at 11:45 PM, Antonio Goncalves <

[e-mail]> wrote:

Here is my code. I think it's my dependencies that are not right, because

resourceFactory is not injected so I get a NPE

>

*public class *RestEndpoint {

    @Inject

    *private *TemplateProcessorFactory factory;

    @Inject

    ResourceFactory resourceFactory;

>

    *public static void *main(String[] args) *throws *IOException {

        *new *RestEndpoint().doIt();

    }

    *private void *doIt() *throws *IOException {

        Resource<URL> templateResource = resourceFactory

.create(getClass().getResource("EndpointWithDTO.jv"));

        Template template = *new *FreemarkerTemplate(templateResource);

*// Mark this resource as a Freemarker template         *TemplateProcessor

processor = factory.fromTemplate(template);

        Map<String,Object> params = *new *HashMap<String,Object>();

*//Could be a POJO also.         params.put("name"*, "JBoss Forge");

        String output = processor.process(params);

*// should return "Hello JBoss Forge".         System.out*

.println(output);

    }

}

>

2014-03-30 22:36 GMT+02:00 Antonio Goncalves <[e-mail]>:

So it might be my pom.xml

>>

>> Where do you get @Inject from ? Just from javax.inject:javax.inject ?

>> Wich Furnace dependencies do you need ?

>>

>>

>> 2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

>>

>> Your code should work, you can't use @Inject outside Furnace environment.

>>>  Not sure what's going on, need to investigate a little further

>>>

>>> Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

>>> escreveu:

>>>

>>> Good old NPE ;o)

>>>

>>> I'm not running the code into a container, so @Inject does not work. In

>>> the readme there is the addonRegistry method. In all the samples, the

>>> registery is injected... but how do I use all that with a good old Main ?

>>>

>>>

>>> 2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>>>

>>>> Why it doesn't work? Is any exception being thrown?

>>>>

>>>> Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

>>>> escreveu:

>>>>

>>>> Hum...

>>>>

>>>> In the README there is :

>>>>

>>>> @Inject private TemplateProcessorFactory factory

>>>>

>>>> But is there a way to use the templating from a Main class ? If I use

>>>> Forge, I have Furnace as a container, and I was trying something like this,

>>>> but it doesn't work :

>>>>

>>>> Furnace furnace = startFurnace();

>>>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>>>> TemplateProcessorFactory factory = imported.get();

>>>>

>>>> Any simple Hello World from a Main class and a pom.xml ?

>>>>

>>>> Thanks

>>>> Antonio

>>>>

>>>>

>>>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>>>

>>>>> Hi Antonio,

>>>>>

>>>>> Roaster currently only maintains a class structure (add/remove fields,

>>>>> methods, interfaces,etc), not code (method bodies) at the moment.

>>>>>

>>>>> There is a JIRA to allow that though.

>>>>>

>>>>> See the templates addon README to learn how to generate content from a

>>>>> template.

>>>>>

>>>>> Best Regards,

>>>>>

>>>>> George Gastaldi

>>>>>

>>>>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

>>>>> escreveu:

>>>>>

>>>>> Hi all,

>>>>>

>>>>> I'm starting to get a bit more confident with Roaster... and now I

>>>>> would like to add templating. If I'm right, Roaster is nice to add bits and

>>>>> pieces of Java here and there, but it's better to use Templates when there

>>>>> is a lot of code, and mix templating and Roaster for better code

>>>>> customization.

>>>>>

>>>>> Is there a sample I could use to write a Hello Word ? A template with

>>>>> an "engine" that uses Roaster to add Java code to the template.

>>>>>

>>>>> Thanks

>>>>>

>>>>> --

>>>>> Antonio Goncalves

>>>>> Software architect and Java Champion

>>>>>

>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>

>>>>

>>>>

>>>> --

>>>> Antonio Goncalves

>>>> Software architect and Java Champion

>>>>

>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>

>>>

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>  | Devoxx France <http://www.devoxx.fr/>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>

>>

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

Hum.... I just did this (starting Furnace in my main) :

https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

But it doesn't work either.

Any idea ?

2014-03-30 23:58 GMT+02:00 Ivan St. Ivanov <[e-mail]>:

Hi Antonio,

As far as I can see, in your main class you are not inside the Furnace

container, you are rather on you own. That is why nobody has injected you

your dependencies.

Cheers,

Ivan

>

On Sun, Mar 30, 2014 at 11:45 PM, Antonio Goncalves <

[e-mail]> wrote:

>> Here is my code. I think it's my dependencies that are not right, because

>> resourceFactory is not injected so I get a NPE

>>

>>

>> *public class *RestEndpoint {

>>

>>     @Inject

>>     *private *TemplateProcessorFactory factory;

>>

>>     @Inject

>>     ResourceFactory resourceFactory;

>>

>>

>>     *public static void *main(String[] args) *throws *IOException {

>>         *new *RestEndpoint().doIt();

>>     }

>>

>>     *private void *doIt() *throws *IOException {

>>         Resource templateResource = resourceFactory

>> .create(getClass().getResource("EndpointWithDTO.jv"));

>>         Template template = *new *FreemarkerTemplate(templateResource);

>> *// Mark this resource as a Freemarker template         *TemplateProcessor

>> processor = factory.fromTemplate(template);

>>         Map<String,Object> params = *new *HashMap<String,Object>();

>> *//Could be a POJO also.         params.put("name"*, "JBoss Forge");

>>         String output = processor.process(params);

>> *// should return "Hello JBoss Forge".         System.out*

>> .println(output);

>>     }

>> }

>>

>>

>> 2014-03-30 22:36 GMT+02:00 Antonio Goncalves <[e-mail]>:

>>

>> So it might be my pom.xml

>>>

>>> Where do you get @Inject from ? Just from javax.inject:javax.inject ?

>>> Wich Furnace dependencies do you need ?

>>>

>>>

>>> 2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

>>>

>>> Your code should work, you can't use @Inject outside Furnace

>>>> environment.  Not sure what's going on, need to investigate a little further

>>>>

>>>> Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

>>>> escreveu:

>>>>

>>>> Good old NPE ;o)

>>>>

>>>> I'm not running the code into a container, so @Inject does not work. In

>>>> the readme there is the addonRegistry method. In all the samples, the

>>>> registery is injected... but how do I use all that with a good old Main ?

>>>>

>>>>

>>>> 2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>>>>

>>>>> Why it doesn't work? Is any exception being thrown?

>>>>>

>>>>> Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

>>>>> escreveu:

>>>>>

>>>>> Hum...

>>>>>

>>>>> In the README there is :

>>>>>

>>>>> @Inject private TemplateProcessorFactory factory

>>>>>

>>>>> But is there a way to use the templating from a Main class ? If I use

>>>>> Forge, I have Furnace as a container, and I was trying something like this,

>>>>> but it doesn't work :

>>>>>

>>>>> Furnace furnace = startFurnace();

>>>>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>>>>> TemplateProcessorFactory factory = imported.get();

>>>>>

>>>>> Any simple Hello World from a Main class and a pom.xml ?

>>>>>

>>>>> Thanks

>>>>> Antonio

>>>>>

>>>>>

>>>>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>>>>

>>>>>> Hi Antonio,

>>>>>>

>>>>>> Roaster currently only maintains a class structure (add/remove

>>>>>> fields, methods, interfaces,etc), not code (method bodies) at the moment.

>>>>>>

>>>>>> There is a JIRA to allow that though.

>>>>>>

>>>>>> See the templates addon README to learn how to generate content from

>>>>>> a template.

>>>>>>

>>>>>> Best Regards,

>>>>>>

>>>>>> George Gastaldi

>>>>>>

>>>>>> Em 29/03/2014, às 14:43, Antonio Goncalves <[e-mail]>

>>>>>> escreveu:

>>>>>>

>>>>>> Hi all,

>>>>>>

>>>>>> I'm starting to get a bit more confident with Roaster... and now I

>>>>>> would like to add templating. If I'm right, Roaster is nice to add bits and

>>>>>> pieces of Java here and there, but it's better to use Templates when there

>>>>>> is a lot of code, and mix templating and Roaster for better code

>>>>>> customization.

>>>>>>

>>>>>> Is there a sample I could use to write a Hello Word ? A template with

>>>>>> an "engine" that uses Roaster to add Java code to the template.

>>>>>>

>>>>>> Thanks

>>>>>>

>>>>>> --

>>>>>> Antonio Goncalves

>>>>>> Software architect and Java Champion

>>>>>>

>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>

>>>>>

>>>>>

>>>>> --

>>>>> Antonio Goncalves

>>>>> Software architect and Java Champion

>>>>>

>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>

>>>>

>>>>

>>>> --

>>>> Antonio Goncalves

>>>> Software architect and Java Champion

>>>>

>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>

>>>

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>  | Devoxx France <http://www.devoxx.fr/>

>>>

>>

>>

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Antonio,

main() methods are not managed  by Furnace, hence why @Inject does not work. You need to fech these services from the AddonRegistry:

Eg:

furnace.getAddonRegistry(ResourceFactory.class).get()

Em 31/03/2014, às 04:26, Antonio Goncalves <[e-mail]> escreveu:

Hum.... I just did this (starting Furnace in my main) :

https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

But it doesn't work either.

Any idea ?

2014-03-30 23:58 GMT+02:00 Ivan St. Ivanov <[e-mail]>:

>> Hi Antonio,

>>

>> As far as I can see, in your main class you are not inside the Furnace container, you are rather on you own. That is why nobody has injected you your dependencies.

>>

>> Cheers,

>> Ivan

>>

>>

>>> On Sun, Mar 30, 2014 at 11:45 PM, Antonio Goncalves  https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

If I do the following, it doesn't work :

ResourceFactory resourceFactory = furnace.getAddonRegistry(ResourceFactory.

class).get();

TemplateProcessorFactory factory =

furnace.getAddonRegistry(TemplateProcessorFactory.class).get();

That because the method getAddonRegistry takes a AddonRepository.

Any idea ?

2014-03-31 16:00 GMT+02:00 George Gastaldi <[e-mail]>:

Antonio,

main() methods are not managed  by Furnace, hence why @Inject does not

work. You need to fech these services from the AddonRegistry:

Eg:

furnace.getAddonRegistry(ResourceFactory.class).get()

Em 31/03/2014, às 04:26, Antonio Goncalves <[e-mail]>

escreveu:

Hum.... I just did this (starting Furnace in my main) :

>

https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

But it doesn't work either.

Any idea ?

>

2014-03-30 23:58 GMT+02:00 Ivan St. Ivanov <[e-mail]>:

>> Hi Antonio,

>>

>> As far as I can see, in your main class you are not inside the Furnace

>> container, you are rather on you own. That is why nobody has injected you

>> your dependencies.

>>

>> Cheers,

>> Ivan

>>

>>

>> On Sun, Mar 30, 2014 at 11:45 PM, Antonio Goncalves <

>> [e-mail]> wrote:

>>

>>> Here is my code. I think it's my dependencies that are not right,

>>> because resourceFactory is not injected so I get a NPE

>>>

>>>

>>> *public class *RestEndpoint {

>>>

>>>     @Inject

>>>     *private *TemplateProcessorFactory factory;

>>>

>>>     @Inject

>>>     ResourceFactory resourceFactory;

>>>

>>>

>>>     *public static void *main(String[] args) *throws *IOException {

>>>         *new *RestEndpoint().doIt();

>>>     }

>>>

>>>     *private void *doIt() *throws *IOException {

>>>         Resource templateResource = resourceFactory

>>> .create(getClass().getResource("EndpointWithDTO.jv"));

>>>         Template template = *new *FreemarkerTemplate(templateResource);

>>> *// Mark this resource as a Freemarker template         *TemplateProcessor

>>> processor = factory.fromTemplate(template);

>>>         Map<String,Object> params = *new *HashMap<String,Object>();

>>> *//Could be a POJO also.         params.put("name"*, "JBoss Forge");

>>>         String output = processor.process(params);

>>> *// should return "Hello JBoss Forge".         System.out*

>>> .println(output);

>>>     }

>>> }

>>>

>>>

>>> 2014-03-30 22:36 GMT+02:00 Antonio Goncalves <[e-mail]>

>>> :

>>>

>>> So it might be my pom.xml

>>>>

>>>> Where do you get @Inject from ? Just from javax.inject:javax.inject ?

>>>> Wich Furnace dependencies do you need ?

>>>>

>>>>

>>>> 2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

>>>>

>>>> Your code should work, you can't use @Inject outside Furnace

>>>>> environment.  Not sure what's going on, need to investigate a little further

>>>>>

>>>>> Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

>>>>> escreveu:

>>>>>

>>>>> Good old NPE ;o)

>>>>>

>>>>> I'm not running the code into a container, so @Inject does not work.

>>>>> In the readme there is the addonRegistry method. In all the samples, the

>>>>> registery is injected... but how do I use all that with a good old Main ?

>>>>>

>>>>>

>>>>> 2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>>>>>

>>>>>> Why it doesn't work? Is any exception being thrown?

>>>>>>

>>>>>> Em 30/03/2014, às 17:14, Antonio Goncalves <[e-mail]>

>>>>>> escreveu:

>>>>>>

>>>>>> Hum...

>>>>>>

>>>>>> In the README there is :

>>>>>>

>>>>>> @Inject private TemplateProcessorFactory factory

>>>>>>

>>>>>> But is there a way to use the templating from a Main class ? If I use

>>>>>> Forge, I have Furnace as a container, and I was trying something like this,

>>>>>> but it doesn't work :

>>>>>>

>>>>>> Furnace furnace = startFurnace();

>>>>>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>>>>>> TemplateProcessorFactory factory = imported.get();

>>>>>>

>>>>>> Any simple Hello World from a Main class and a pom.xml ?

>>>>>>

>>>>>> Thanks

>>>>>> Antonio

>>>>>>

>>>>>>

>>>>>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>>>>>

>>>>>>> Hi Antonio,

>>>>>>>

>>>>>>> Roaster currently only maintains a class structure (add/remove

>>>>>>> fields, methods, interfaces,etc), not code (method bodies) at the moment.

>>>>>>>

>>>>>>> There is a JIRA to allow that though.

>>>>>>>

>>>>>>> See the templates addon README to learn how to generate content from

>>>>>>> a template.

>>>>>>>

>>>>>>> Best Regards,

>>>>>>>

>>>>>>> George Gastaldi

>>>>>>>

>>>>>>> Em 29/03/2014, às 14:43, Antonio Goncalves <

>>>>>>> [e-mail]> escreveu:

>>>>>>>

>>>>>>> Hi all,

>>>>>>>

>>>>>>> I'm starting to get a bit more confident with Roaster... and now I

>>>>>>> would like to add templating. If I'm right, Roaster is nice to add bits and

>>>>>>> pieces of Java here and there, but it's better to use Templates when there

>>>>>>> is a lot of code, and mix templating and Roaster for better code

>>>>>>> customization.

>>>>>>>

>>>>>>> Is there a sample I could use to write a Hello Word ? A template

>>>>>>> with an "engine" that uses Roaster to add Java code to the template.

>>>>>>>

>>>>>>> Thanks

>>>>>>>

>>>>>>> --

>>>>>>> Antonio Goncalves

>>>>>>> Software architect and Java Champion

>>>>>>>

>>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>>

>>>>>>> _______________________________________________

>>>>>>> forge-dev mailing list

>>>>>>> [e-mail]

>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>

>>>>>>>

>>>>>>> _______________________________________________

>>>>>>> forge-dev mailing list

>>>>>>> [e-mail]

>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>

>>>>>>

>>>>>>

>>>>>>

>>>>>> --

>>>>>> Antonio Goncalves

>>>>>> Software architect and Java Champion

>>>>>>

>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>

>>>>>

>>>>>

>>>>> --

>>>>> Antonio Goncalves

>>>>> Software architect and Java Champion

>>>>>

>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>>

>>>>> _______________________________________________

>>>>> forge-dev mailing list

>>>>> [e-mail]

>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>

>>>>

>>>>

>>>>

>>>> --

>>>> Antonio Goncalves

>>>> Software architect and Java Champion

>>>>

>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>

>>>

>>>

>>>

>>> --

>>> Antonio Goncalves

>>> Software architect and Java Champion

>>>

>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>  | Devoxx France <http://www.devoxx.fr/>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Oh, sorry, my fault. It should be:

furnace.getAddonRegistry().getServices(ResourceFactory.class).get();

Em 31/03/2014, às 14:11, Antonio Goncalves <[e-mail]> escreveu:

If I do the following, it doesn't work :

ResourceFactory resourceFactory = furnace.getAddonRegistry(ResourceFactory.class).get();

TemplateProcessorFactory factory = furnace.getAddonRegistry(TemplateProcessorFactory.class).get();

That because the method getAddonRegistry takes a AddonRepository.

Any idea ?

2014-03-31 16:00 GMT+02:00 George Gastaldi <[e-mail]>:

>> Antonio,

>>

>> main() methods are not managed  by Furnace, hence why @Inject does not work. You need to fech these services from the AddonRegistry:

>>

>> Eg:

>> furnace.getAddonRegistry(ResourceFactory.class).get()

>>

>>> Em 31/03/2014, às 04:26, Antonio Goncalves  https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

Grrr....

ContainerException: No services of type

could be found in any

started addons.

Here is the code, I might be doing something wrong.... but I don't know

what else to do now

https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

2014-03-31 19:19 GMT+02:00 George Gastaldi <[e-mail]>:

Oh, sorry, my fault. It should be:

furnace.getAddonRegistry().getServices(ResourceFactory.class).get();

>

Em 31/03/2014, às 14:11, Antonio Goncalves <[e-mail]>

escreveu:

If I do the following, it doesn't work :

ResourceFactory resourceFactory = furnace.getAddonRegistry(ResourceFactory.

class).get();

TemplateProcessorFactory factory =

furnace.getAddonRegistry(TemplateProcessorFactory.class).get();

That because the method getAddonRegistry takes a AddonRepository.

>

Any idea ?

>

>

2014-03-31 16:00 GMT+02:00 George Gastaldi <[e-mail]>:

>> Antonio,

>>

>> main() methods are not managed  by Furnace, hence why @Inject does not

>> work. You need to fech these services from the AddonRegistry:

>>

>> Eg:

>> furnace.getAddonRegistry(ResourceFactory.class).get()

>>

>> Em 31/03/2014, às 04:26, Antonio Goncalves <[e-mail]>

>> escreveu:

>>

>> Hum.... I just did this (starting Furnace in my main) :

>>

>>

>> https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

>>

>> But it doesn't work either.

>>

>> Any idea ?

>>

>>

>> 2014-03-30 23:58 GMT+02:00 Ivan St. Ivanov <[e-mail]>:

>>

>>> Hi Antonio,

>>>

>>> As far as I can see, in your main class you are not inside the Furnace

>>> container, you are rather on you own. That is why nobody has injected you

>>> your dependencies.

>>>

>>> Cheers,

>>> Ivan

>>>

>>>

>>> On Sun, Mar 30, 2014 at 11:45 PM, Antonio Goncalves <

>>> [e-mail]> wrote:

>>>

>>>> Here is my code. I think it's my dependencies that are not right,

>>>> because resourceFactory is not injected so I get a NPE

>>>>

>>>>

>>>> *public class *RestEndpoint {

>>>>

>>>>     @Inject

>>>>     *private *TemplateProcessorFactory factory;

>>>>

>>>>     @Inject

>>>>     ResourceFactory resourceFactory;

>>>>

>>>>

>>>>     *public static void *main(String[] args) *throws *IOException {

>>>>         *new *RestEndpoint().doIt();

>>>>     }

>>>>

>>>>     *private void *doIt() *throws *IOException {

>>>>         Resource templateResource = resourceFactory

>>>> .create(getClass().getResource("EndpointWithDTO.jv"));

>>>>         Template template = *new *FreemarkerTemplate(templateResource);

>>>>

>>>> *// Mark this resource as a Freemarker template         *TemplateProcessor

>>>> processor = factory.fromTemplate(template);

>>>>         Map<String,Object> params = *new *HashMap<String,Object>();

>>>> *//Could be a POJO also.         params.put("name"*, "JBoss Forge"

>>>> );

>>>>         String output = processor.process(params);

>>>> *// should return "Hello JBoss Forge".         System.out*

>>>> .println(output);

>>>>     }

>>>> }

>>>>

>>>>

>>>> 2014-03-30 22:36 GMT+02:00 Antonio Goncalves <[e-mail]

>>>> >:

>>>>

>>>> So it might be my pom.xml

>>>>>

>>>>> Where do you get @Inject from ? Just from javax.inject:javax.inject ?

>>>>> Wich Furnace dependencies do you need ?

>>>>>

>>>>>

>>>>> 2014-03-30 22:31 GMT+02:00 George Gastaldi <[e-mail]>:

>>>>>

>>>>> Your code should work, you can't use @Inject outside Furnace

>>>>>> environment.  Not sure what's going on, need to investigate a little further

>>>>>>

>>>>>> Em 30/03/2014, às 17:26, Antonio Goncalves <[e-mail]>

>>>>>> escreveu:

>>>>>>

>>>>>> Good old NPE ;o)

>>>>>>

>>>>>> I'm not running the code into a container, so @Inject does not work.

>>>>>> In the readme there is the addonRegistry method. In all the samples, the

>>>>>> registery is injected... but how do I use all that with a good old Main ?

>>>>>>

>>>>>>

>>>>>> 2014-03-30 22:17 GMT+02:00 George Gastaldi <[e-mail]>:

>>>>>>

>>>>>>> Why it doesn't work? Is any exception being thrown?

>>>>>>>

>>>>>>> Em 30/03/2014, às 17:14, Antonio Goncalves <

>>>>>>> [e-mail]> escreveu:

>>>>>>>

>>>>>>> Hum...

>>>>>>>

>>>>>>> In the README there is :

>>>>>>>

>>>>>>> @Inject private TemplateProcessorFactory factory

>>>>>>>

>>>>>>> But is there a way to use the templating from a Main class ? If I

>>>>>>> use Forge, I have Furnace as a container, and I was trying something like

>>>>>>> this, but it doesn't work :

>>>>>>>

>>>>>>> Furnace furnace = startFurnace();

>>>>>>> Imported furnace.getAddonRegistry(TemplateProcessorFactory.class);

>>>>>>> TemplateProcessorFactory factory = imported.get();

>>>>>>>

>>>>>>> Any simple Hello World from a Main class and a pom.xml ?

>>>>>>>

>>>>>>> Thanks

>>>>>>> Antonio

>>>>>>>

>>>>>>>

>>>>>>> 2014-03-29 19:03 GMT+01:00 George Gastaldi <[e-mail]>:

>>>>>>>

>>>>>>>> Hi Antonio,

>>>>>>>>

>>>>>>>> Roaster currently only maintains a class structure (add/remove

>>>>>>>> fields, methods, interfaces,etc), not code (method bodies) at the moment.

>>>>>>>>

>>>>>>>> There is a JIRA to allow that though.

>>>>>>>>

>>>>>>>> See the templates addon README to learn how to generate content

>>>>>>>> from a template.

>>>>>>>>

>>>>>>>> Best Regards,

>>>>>>>>

>>>>>>>> George Gastaldi

>>>>>>>>

>>>>>>>> Em 29/03/2014, às 14:43, Antonio Goncalves <

>>>>>>>> [e-mail]> escreveu:

>>>>>>>>

>>>>>>>> Hi all,

>>>>>>>>

>>>>>>>> I'm starting to get a bit more confident with Roaster... and now I

>>>>>>>> would like to add templating. If I'm right, Roaster is nice to add bits and

>>>>>>>> pieces of Java here and there, but it's better to use Templates when there

>>>>>>>> is a lot of code, and mix templating and Roaster for better code

>>>>>>>> customization.

>>>>>>>>

>>>>>>>> Is there a sample I could use to write a Hello Word ? A template

>>>>>>>> with an "engine" that uses Roaster to add Java code to the template.

>>>>>>>>

>>>>>>>> Thanks

>>>>>>>>

>>>>>>>> --

>>>>>>>> Antonio Goncalves

>>>>>>>> Software architect and Java Champion

>>>>>>>>

>>>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>>>

>>>>>>>> _______________________________________________

>>>>>>>> forge-dev mailing list

>>>>>>>> [e-mail]

>>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>>

>>>>>>>>

>>>>>>>> _______________________________________________

>>>>>>>> forge-dev mailing list

>>>>>>>> [e-mail]

>>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>>

>>>>>>>

>>>>>>>

>>>>>>>

>>>>>>> --

>>>>>>> Antonio Goncalves

>>>>>>> Software architect and Java Champion

>>>>>>>

>>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>>

>>>>>>> _______________________________________________

>>>>>>> forge-dev mailing list

>>>>>>> [e-mail]

>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>

>>>>>>>

>>>>>>> _______________________________________________

>>>>>>> forge-dev mailing list

>>>>>>> [e-mail]

>>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>>

>>>>>>

>>>>>>

>>>>>>

>>>>>> --

>>>>>> Antonio Goncalves

>>>>>> Software architect and Java Champion

>>>>>>

>>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>>

>>>>>> _______________________________________________

>>>>>> forge-dev mailing list

>>>>>> [e-mail]

>>>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>>>

>>>>>

>>>>>

>>>>>

>>>>> --

>>>>> Antonio Goncalves

>>>>> Software architect and Java Champion

>>>>>

>>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>>

>>>>

>>>>

>>>>

>>>> --

>>>> Antonio Goncalves

>>>> Software architect and Java Champion

>>>>

>>>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>>>  | Devoxx France <http://www.devoxx.fr/>

>>>>

>>>> _______________________________________________

>>>> forge-dev mailing list

>>>> [e-mail]

>>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>>

>>>

>>>

>>> _______________________________________________

>>> forge-dev mailing list

>>> [e-mail]

>>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>>

>>

>>

>>

>> --

>> Antonio Goncalves

>> Software architect and Java Champion

>>

>> Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

>>  | LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

>>  | Devoxx France <http://www.devoxx.fr/>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>>

>> _______________________________________________

>> forge-dev mailing list

>> [e-mail]

>> https://lists.jboss.org/mailman/listinfo/forge-dev

>>

>

>

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> | Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

>

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site <http://www.antoniogoncalves.org/> |

Twitter<http://twitter.com/agoncal>

| LinkedIn <http://www.linkedin.com/in/agoncal> | Paris

JUG<http://www.parisjug.org/>

| Devoxx France <http://www.devoxx.fr/>

[gastaldi]

Check if your target/addons folder contains the deployed addons structure. It should have been created by the furnace-maven-plugin

Em 31/03/2014, às 14:39, Antonio Goncalves <[e-mail]> escreveu:

Grrr....

ContainerException: No services of type could be found in any started addons.

Here is the code, I might be doing something wrong.... but I don't know what else to do now

https://github.com/agoncal/agoncal-sample-forge/blob/master/03-template/src/main/java/org/agoncal/sample/forge/template/RestEndpoint.java

2014-03-31 19:19 GMT+02:00 George Gastaldi <[e-mail]>:

>> Oh, sorry, my fault. It should be:

>> furnace.getAddonRegistry().getServices(ResourceFactory.class).get();

>>

>>

>>> Em 31/03/2014, às 14:11, Antonio Goncalves  https://lists.jboss.org/mailman/listinfo/forge-dev

--

Antonio Goncalves

Software architect and Java Champion

Web site | Twitter | LinkedIn | Paris JUG | Devoxx France

_______________________________________________

forge-dev mailing list

[e-mail]

https://lists.jboss.org/mailman/listinfo/forge-dev