Please Help, no modules visible except forums?

[aristotle]

Dont seem to have any modules for a new install and the instructions about running ./build.sh deploy-components from the nukes directory doesnt work cause there is no build.sh file anywhere??

RH 9, J2ee 1.4, mysql 4.0.18, nukes 1.0.0-mysql.

1: Setup nukes database OK

2: Copied the following files to /usr/local/jboss-3.2.3/server/default/lib
- jdbc2_0-stdext.jar
- jta-spec1_0_1.jar
- mysql-connector-java-3.0.11-stable-bin.jar

3: Started jboss/nukes with /usr/local/boss-3.2.3/bin/run.sh

4: Wen to http://hostname:8080 and logged in with admin/admin

5: Only module/block visible is Forums?

[jae77]

what "release" are you using? the source release, "binary only" release, or the one that comes pre-packaged w/ jboss?

[aristotle]

I "think" it is the prepacjaged binary since trhere is a jboss folder in the zip file

nukes-1.0.0-mysql.zip

But I followed the supposed instructions and installed jboss first?

[aristotle]

I just donwloaded the nukes-1.0.0-src.zip so are there any instructions for installnig from source? I see there are numerous build.sh scripts now

[jae77]

i just downloaded that file, and i don't see a jboss directory contained within it.

what you'll want to do is the following:

1) create a directory under JBOSS_HOME/server/default called nukes

2) remove all "nukes" files from the JBOSS_HOME/server/default directory except for the following:

nukes.ear
nukes-ds.xml

3) take all the rest of the files (there should be a bunch of -service.xml files, a nukes-bb.ear, and nukes-permission.sar) and copy all of those into the JBOSS_HOME/server/default/nukes directory that you created.

start up jboss and you should be good to go. these instructions can also be found in the install.txt file that is contained in the nukes-1.0.0-mysql.zip file.

[aristotle]

Followed your instructions and it removed almost all the content that was there before and now its a very blank home page only showing the header and a messsage "file id is not indictaed".

There are no "nukes" files under /usr/local/jboss-3.2.3/server/default, only folders.

Removed nukes folder ...

/usr/local/jboss-3.2.3/server/default/nukes

Recreated nukes folder

/usr/local/jboss-3.2.3/server/default/nukes

Copied nukes.ear, nukes-ds.xml to folder above

Restarted jboss

went to http://hostname:8080/nukes/

Only header and message about file ID, worse state than before. Instructions are wrong. Any "other" suggestions?

Also, the install.txt ACTUALLY says

"4/ Put the nukes datasource, it will use the driver and will enable nukes to use the database
you have created in the database setup process. Copy nukes-ds.xml to jboss-3.2.3/server/default/deploy
5/ Copy nukes.ear to jboss-3.2.3/server/default/deploy
6/ Copy the content of the directory nukes to jboss-3.2.3/server/default/nukes (this is where additional modules are copied)"

Note #6 about copying content of the nukes directory, which includes many more files than the two you indicated?

[jae77]

the nukes.ear and nukes-ds.xml file need to go in the JBOSS_HOME/server/default/deploy directory - i did say in my previous post to remove all nukes files EXCEPT those two from the "default" directory - which i now realize i probably should have said "deploy" directory, sorry.

so here it is again, revised. :)

1) remove all nukes files from JBOSS_HOME/server/default/deploy

2) create JBOSS_HOME/server/default/nukes

3) copy nukes-ds.xml and nukes.ear to JBOSS_HOME/server/default/deploy

4) copy all other files to JBOSS_HOME/server/default/nukes.

5) delete JBOSS_HOME/server/default/tmp just to be on the safe side.

[aristotle]

wow, this should be that hard. Went through the exact steps, which was what I did on first install, same steps, and now it is ciompletely hooped and I bet lots of errors starting jboss


MBeans waiting for other MBeans:
[ObjectName: jboss:service=WebService
state: FAILED
I Depend On:
Depends On Me: jboss.ejb:service=EJBDeployer
java.net.BindException: Address already in use, ObjectName: jboss:service=Naming
state: FAILED
I Depend On:
Depends On Me: java.rmi.server.ExportException: Port already in use: 1098; nested exception is:
java.net.BindException: Address already in use, ObjectName: jboss:service=ClientUserTransaction
state: CREATED
I Depend On: jboss:service=proxyFactory,target=ClientUserTransactionFactory
jboss:service=proxyFactory,target=ClientUserTransaction

Depends On Me: , ObjectName: jboss:service=proxyFactory,target=ClientUserTransactionFactory
state: CREATED
I Depend On: jboss:service=invoker,type=jrmp

Depends On Me: jboss:service=ClientUserTransaction
, ObjectName: jboss:service=proxyFactory,target=ClientUserTransaction
state: CREATED
I Depend On: jboss:service=invoker,type=jrmp

Depends On Me: jboss:service=ClientUserTransaction
, ObjectName: jboss:service=invoker,type=jrmp
state: FAILED
I Depend On: jboss:service=TransactionManager

Depends On Me: jboss:service=proxyFactory,target=ClientUserTransactionFactory
jboss:service=proxyFactory,target=ClientUserTransaction
jboss.jmx:type=adaptor,name=Invoker,protocol=jrmp,service=proxyFactory
java.rmi.server.ExportException: Port already in use: 4444; nested exception is:
java.net.BindException: Address already in use, ObjectName: jboss:service=invoker,type=pooled
state: FAILED
I Depend On: jboss:service=TransactionManager

Depends On Me: java.net.BindException: Address already in use, ObjectName: jboss.ejb:service=EJBDeployer
state: CREATED
I Depend On: jboss:service=TransactionManager
jboss:service=WebService

Depends On Me: , ObjectName: jboss.mq:service=InvocationLayer,type=HTTP
state: CONFIGURED
I Depend On: jboss.mq:service=Invoker
jboss.web:service=WebServer

Depends On Me: , ObjectName: jboss.web:service=WebServer
state: FAILED
I Depend On: jboss:service=TransactionManager

Depends On Me: jboss.mq:service=InvocationLayer,type=HTTP
LifecycleException: Protocol handler initialization failed: java.net.BindException: Address already in use:8080, ObjectName: jboss.jmx:name=SnmpAgent,service=trapd,type=logger
state: FAILED
I Depend On:
Depends On Me: java.net.BindException: Address already in use, ObjectName: jboss.admin:service=PluginManager
state: FAILED
I Depend On: jboss.jmx:alias=jmx/rmi/RMIAdaptor

Depends On Me: javax.naming.NameNotFoundException: invoker not bound, ObjectName: jboss.jmx:type=adaptor,name=Invoker,protocol=jrmp,service=proxyFactory
state: CONFIGURED
I Depend On: jboss:service=invoker,type=jrmp

Depends On Me: , ObjectName: jboss.mq:service=InvocationLayer,type=OIL
state: FAILED
I Depend On: jboss.mq:service=Invoker

Depends On Me: java.net.BindException: Address already in use, ObjectName: jboss.mq:service=InvocationLayer,type=OIL2
state: FAILED
I Depend On: jboss.mq:service=Invoker

Depends On Me: java.net.BindException: Address already in use, ObjectName: jboss.mq:service=InvocationLayer,type=UIL2
state: FAILED
I Depend On: jboss.mq:service=Invoker

Depends On Me: java.net.BindException: Address already in use, ObjectName: nukes.modules:name=user
state: CONFIGURED
I Depend On: nukes:service=main
jboss.j2ee:service=EJB,jndiName=nukes/User
jboss.j2ee:service=EJB,jndiName=nukes/Group

Depends On Me: nukes.modules:name=theme
, ObjectName: nukes.modules:name=theme
state: CONFIGURED
I Depend On: nukes.modules:name=user

Depends On Me: nukes.modules:name=block
nukes.modules:name=core
, ObjectName: nukes.modules:name=block
state: CONFIGURED
I Depend On: nukes.modules:name=theme

Depends On Me: , ObjectName: nukes.modules:name=core
state: CONFIGURED
I Depend On: nukes.modules:name=theme

[jae77]

there is still a jboss instance running somewhere, which is why the "Port Already in Use" messages are appearing.

even if you've killed the jboss process, you may need to reboot if it's a windows box to clear everything up.

[aristotle]

ahh that fixed it, rebotting. So now I am back to where I started, without loggin in I only see the "Forums" module...is that correct?

When I login in as admin/admin I can see the following


Main Menu
· Home

Modules
· Permission
· Select theme
· Manage groups
· Index
· Manage html
· Change your info
· Member list
· Logout/Exit
· Blocks
· Forums
· Forums security
· Forums admin
· My Account


If this is correct, my next question is about blocks. I created a new HTML Block and wanted to have it simply list links I have from a PhpNuke block. Just html with bulletted list of links. How do I add that do a block? The block shows up on the right where I put it but just says "file not available" and going to edit the block is only gives four fields of options

Title
DisplayName

etc

How do I simply add some html content to a block, or any other content for that matter?

Thanks again for all your help.