Running FuseESB inside FuseIDE fails to start - "JMX Connector Thread [service:jmx:rmi://0.0.0.0:44444/jndi/rmi://0.0.0.0:1099/karaf-root]" java.lang.RuntimeException: Could not start JMX connector server. (Permission denied: connect)

[sloanecourt]

I've using FuseIDE and have added a JBoss-Fuse-6.0.0 server. When I start this server I get the following error  "JMX Connector Thread [service:jmx:rmi://0.0.0.0:44444/jndi/rmi://0.0.0.0:1099/karaf-root]" java.lang.RuntimeException: Could not start JMX connector server. (Permission denied: connect)

Exception in thread "JMX Connector Thread [service:jmx:rmi://0.0.0.0:44444/jndi/rmi://0.0.0.0:1099/karaf-root]" java.lang.RuntimeException: Could not start JMX connector server

          at org.apache.karaf.management.ConnectorServerFactory$1.run(ConnectorServerFactory.java:252)

Caused by: java.io.IOException: Cannot bind to URL [rmi://0.0.0.0:1099/karaf-root]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: Exception creating connection to: 0.0.0.0; nested exception is:

          java.net.SocketException: Permission denied: connect]

          at javax.management.remote.rmi.RMIConnectorServer.newIOException(RMIConnectorServer.java:826)

          at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:431)

          at org.apache.karaf.management.ConnectorServerFactory$1.run(ConnectorServerFactory.java:239)

Caused by: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: Exception creating connection to: 0.0.0.0; nested exception is:

          java.net.SocketException: Permission denied: connect]

          at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:143)

          at com.sun.jndi.toolkit.url.GenericURLContext.bind(GenericURLContext.java:226)

          at javax.naming.InitialContext.bind(InitialContext.java:419)

          at javax.management.remote.rmi.RMIConnectorServer.bind(RMIConnectorServer.java:643)

          at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:426)

          ... 1 more

Caused by: java.rmi.ConnectIOException: Exception creating connection to: 0.0.0.0; nested exception is:

          java.net.SocketException: Permission denied: connect

          at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:632)

          at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:216)

          at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:202)

          at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:340)

          at sun.rmi.registry.RegistryImpl_Stub.bind(Unknown Source)

          at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:137)

          ... 5 more

Caused by: java.net.SocketException: Permission denied: connect

          at java.net.TwoStacksPlainSocketImpl.socketConnect(Native Method)

          at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:339)

          at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:198)

          at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:182)

          at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:157)

          at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:391)

          at java.net.Socket.connect(Socket.java:579)

          at java.net.Socket.connect(Socket.java:528)

          at java.net.Socket.<init>(Socket.java:425)

          at java.net.Socket.<init>(Socket.java:208)

          at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:40)

          at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:146)

          at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:613)

          ... 10 more

I don't see the FuseESB banner, and what console / shell is provided doesn't allow any interacrtion.

If I run FUSE from the command line, I get the same error, but this time I do see the FuseESB banner, and I can interact with the console.

I've used "netstat -a" to determine that port 1099 is not in use before starting FuseESB.

I was wondering if anybody has seen a similar problem, the environment I'm running FuseESB on is.

• Windows 7.0 (64bit)
• Oracle jdk1.7.0_21 (64bit)  (both the ide & JAVA_HOME system variable point to this JDK)
• jboss-fuse-full-6.0.0.redhat-024
• FuseIDE-6.0.0.129-win32.win32.x86_64

Any pointers would be greatly appreciated.

Thanks in advance.

Tony

[sloanecourt]

The only reference to security I can find is [1], is this configuration needed to use fuse within the FuseIDE ?

[1]https://access.redhat.com/site/documentation/en-US/JBoss_Fuse/6.0/html/Configuring_and_Running_JBoss_Fuse/files/BasicSec.html

[sloanecourt]

The main problem with connecting to the FuseESB console is [1] below, again a security issue.

[1] Error connecting 0.0.0.0:8101 : SSH client error: java.net.SocketException: Permission denied: connect

I've tried the following steps (but it still gave me "Permission denied" for both JMX & SSH ports.)

(a) etc/user.properties - added user=karaf, password=karaf, role=admin

(b) etc/key.properties - uncommented the "karaf" user

(c) etc/system.properties - uncommented the jmx user & password (see below) and set to "karaf"

     #

     # Authentication - must match an entry in user.properties with the admin privilege

     #

     activemq.jmx.user=karaf

     activemq.jmx.password=karaf

(d) Created a new FuseESB server in the ide with user=karaf, password=karaf

(e) Started the new server, and still get the JMX connection error "Permission denied".

Is there a document or link that describes the steps needed, or is this a bug in this version of fuseESB.

[sloanecourt]

To resolve the JMX exception at server startup.

Replace ip addresss 0.0.0.0 with 127.0.0.1 in the following config files contained in the etc directory.

activemq.xml

org.apache.karaf.management.cfg

org.apache.karaf.shell.cfg

(See thread https://community.jboss.org/thread/229621)

This still leaves an issue with the "Fuse JMX navigator" and the SSH connection to the shell, both still showing "Permission denied".

[sloanecourt]

After creating a new FuseESB server instance (user=karaf, password=karaf), starting it and allowing the host;key files to be created, the SSH problem was resolved and the shell is now working.

This still leaves an issue with "Fuse JMX navigator".

[lhein]

Anthony,

is your issue already solved? If not could you describe what exactly your problem now is?

Thanks

Lars

[sloanecourt]

Lars,

When I first started FuseESB inside FuseIDE I got "Permission denied" when trying to connect to both JMX and SSH, with the net result that the shell didn't start.

I've now managed to get FuseESB running inside FuseIDE, and the shell is now working, both the JMX and SSH connection issues are now resolved.

To resolved these issues I had to make several changes to the config files in the etc directory.

a) enable security (wasn't sure if this was needed)

b) changing all references for ip address 0.0.0.0 to 127.0.0.1

The only remaining problem is that the "Fuse JMX Navigator" doesn't appear to be able to connect to the FuseESB process, fails "Permission denied", I also tested this out using simple java proces invoking camel, the process starts up, no errors, you can see the process listed in the "Fuse JMX Navigator" view but again unable to connect to it, gives "Permission denied".

The "Fuse JMX Navigator" problem appears to be erratic and appears to be working at the moment, it may be due to the network configuration on this computer.

Regards

Tony

[sloanecourt]

Lars,

Regarding the erratic nature of the "Fuse JMX Navigator", the problem occurs when I leave the office network and appear to lose name resolution for this computer.

Regards

Tony